| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
|
Still deciding? Get samples of US$ 60000/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| ITEM | UNIT | JSL-26ABY | JSL-32ABY | ||||||||||||||||
| system | S1 | S2 | S1 | S2 | |||||||||||||||
| BASE SPECIFICATION | Number of tools | TYPE | A | B | C | CB | A | B | C | CB | A(L) | B(L) | C(L) | CB(L) | A(L) | B(L) | C(L) | CB(L) | |
| Outer diameter cutter (o 16) | 9 | 5 | 9 | 5 | 4 | 1 | 9 | 6 | 9 | 6 | 4 | 1 | |||||||
| Inner hole cutter (o25) | 5 | 4 | |||||||||||||||||
| Sidetracking tool (ER16) | 7 | 4 | 7 | 4 | 4 | 7 | 3 | 7 | 3 | 3 | |||||||||
| B axis (ER16) | 5 | 5 | 4 | 4 | |||||||||||||||
| End drill (ER16) | 4 | 5 | 4 | ||||||||||||||||
| Deep hole drill (Ø25) | 2 | 2 | |||||||||||||||||
| Max. turning diameter | mm | 26 | 32 | ||||||||||||||||
| Max. bore diameter | mm | 13 | 10 | 13 | 10 | ||||||||||||||
| Maximum dia of tapping | M10 | M8 | M10 | M8 | |||||||||||||||
| Maximum bore diameter for side drilling | mm | 10 | |||||||||||||||||
| Maximum tapping with side drilling | M8 | ||||||||||||||||||
| Max turning length | mm | BUSH:260N (ON-BUSH:100) | |||||||||||||||||
| Main/ back | Main Spindle speed | rpm | 8000 | 6000 | |||||||||||||||
| Back shaft speed | rpm | 8000 | 6000 | ||||||||||||||||
| Power tool speed | rpm | 8000 | |||||||||||||||||
| B-axis power tool speed | rpm | 5000 | |||||||||||||||||
| Collet type | |||||||||||||||||||
| Main Spindle (continuous/peak) | kw | 2.5/5.5 | 2.2/3.7 | 2.5/5.5 | 2.5/5.5 | ||||||||||||||
| X axis | kw | 1.4 | 2.5 | 1.4 | 2.5 | ||||||||||||||
| Y axis | kw | 1.6 | 2.5 | 1.6 | 2.5 | ||||||||||||||
| Z axis | kw | 2.5 | 1.4 | 2.5 | 1.4 | ||||||||||||||
| B-axis power drill | kw | 2.5 | |||||||||||||||||
| Drill power | kw | 2.5 | |||||||||||||||||
| rapid feed | m/min | 30 | |||||||||||||||||
| Cutting oil capacity | L | 240(100%) | |||||||||||||||||
| Machine Dimensions (L x W x H) | mm | 2865x1791x2100 | 2865x1791x2100 | ||||||||||||||||
| Weight | kg | 4790 | 4890 | ||||||||||||||||
| Note: Code (L) is Φ38 | *: Our company reserves the right to change the specification without advance notice. | ||||||||||||||||||
| Standard accessories | |||||||||||||||||||
| A | A(L) | B | B(L) | C | C(L) | CB | CB(L) | ||||||||||||
| 26# | 32# | 26# | 32# | 26# | 32# | 26# | 32# | ||||||||||||
| Main spindle outer diameter tool holder 9 stations | • | • | N | N | • | • | N | N | |||||||||||
| Main spindle outer diameter tool holder 6 stations | N | N | N | • | N | N | N | • | |||||||||||
| Main spindle outer diameter tool holder 5 stations | N | N | • | N | N | N | • | N | |||||||||||
| Inner hole tool holder 5 stations | • | • | • | • | • | • | • | • | |||||||||||
| Main shaft side milling cutter seat 7 stations | • | • | N | N | • | • | N | N | |||||||||||
| Main shaft side milling cutter seat 4 stations | N | N | • | N | N | N | • | N | |||||||||||
| Main shaft side milling cutter seat 3 stations | N | N | N | • | N | N | N | • | |||||||||||
| B axis double-sided tool holder each 5 stations | N | N | • | N | N | N | • | N | |||||||||||
| B axis double-sided tool holder each 4 stations | N | N | N | • | N | N | N | • | |||||||||||
| Sub spindle machining tool holder 16 stations | • | N | • | N | N | N | N | N | |||||||||||
| (Outer diameter 4, inner hole 4, side milling 4, end milling 4) | |||||||||||||||||||
| Sub spindle machining tool holder 12 stations | N | • | N | • | N | N | N | N | |||||||||||
| (Outer 4, side milling 3, end milling 5) | |||||||||||||||||||
| Sub spindle machining tool holder 4 stations (end drilling)+ outer diameter tool holder 1 station | N | N | N | N | • | • | • | • | |||||||||||
| main spindle hydraulic rotary cylinder | • | • | • | • | • | • | • | • | |||||||||||
| Sub spindle hydraulic rotary cylinder | • | • | • | • | • | • | • | • | |||||||||||
| Main spindle C axis 1/1000 | • | • | • | • | • | • | • | • | |||||||||||
| Sub spindle C axis 1/1000 | • | • | • | • | • | • | • | • | |||||||||||
| The main and secondary spindle barrels are each 1 | • | • | • | • | • | • | • | • | |||||||||||
| Fixed guide sleeve seat | • | • | • | • | • | • | • | • | |||||||||||
| Finished product receiver and finished product conveyor | • | • | • | • | • | • | • | • | |||||||||||
| Tools and toolboxes | • | • | • | • | • | • | • | • | |||||||||||
| Floodlight | • | • | • | • | • | • | • | • | |||||||||||
| Cutting water equipment | • | • | • | • | • | • | • | • | |||||||||||
| Lubricating oil system | • | • | • | • | • | • | • | • | |||||||||||
| Cutting water detection (electronic) | • | • | • | • | • | • | • | • | |||||||||||
| Cut-off detection | • | • | • | • | • | • | • | • | |||||||||||
| Operating instruction | • | • | • | • | • | • | • | • | |||||||||||
| NC operation manual | • | • | • | • | • | • | • | • | |||||||||||
| NC maintenance and parameter description | • | • | • | • | • | • | • | • | |||||||||||
| Tool optional accessories | |||||||||||||||||||
| Positive spindle front eccentric drilling 3 stations | S | S | N | N | S | S | N | N | |||||||||||
| Positive spindle front eccentric drilling 2 stations | S | S | S | S | S | S | S | S | |||||||||||
| Positive spindle front Angle eccentric drill 3 stations | S | S | N | N | S | S | N | N | |||||||||||
| Main shaft milling tool holder group | S | S | S | S | S | S | S | S | |||||||||||
| Main shaft Angle milling tool seat | S | S | S | S | S | S | S | S | |||||||||||
| Positive spindle saw blade base group | S | S | S | S | S | S | S | S | |||||||||||
| Main spindle hobbing tool holder group | S | S | S | S | S | S | S | S | |||||||||||
| Auxiliary spindle fixing tool holder | S | S | S | S | S | S | S | S | |||||||||||
| Auxiliary spindle power tool holder | S | S | S | S | S | S | S | S | |||||||||||
| Secondary spindle saw blade base | S | S | S | S | S | S | S | S | |||||||||||
| Secondary spindle side milling cutter seat | N | N | N | N | S | S | S | S | |||||||||||
| •:Standard S:Selectable N:No | : JSL-32ABY-AL 38# Note: Code (L) is Φ38 | ||||||||||||||||||
| Optional accessories | |||||||||||||||||||
| AHand wheel programming device | AScrap car | AElectric box cooling | |||||||||||||||||
| AGuide bush | AOil mist recovery machine | ACutting oil coolers | |||||||||||||||||
| ASynchronous rotating bushing set | AKnife drive cap bushing group | AHigh pressure pump 100BAR(including cooling machine) | |||||||||||||||||
| AER16 collet set (1 set of 10) | ALong parts receiving group | AInk feeder | |||||||||||||||||
| AIron filings conveyor | AVoltage stabilizer | ||||||||||||||||||
JINN FA Gang Tool CNC Lathe's Advantage:
1: Simplicity and Affordability
Gang tool lathes are often more cost-effective than turret lathes due to the simplicity of their tool change process. The lathe's standard axis servos and leadscrews handle all the work, whereas motorizing a turret can increase costs significantly.
2: Precision
Gang tool CNC lathes have an accuracy advantage over turret lathes due to their simpler moving parts, which reduces tolerance stack up and other types of slop. Additionally, the gang lathe is better suited for moving parts across shorter distances.
3: Rapidity
The tool change process in gang lathes is incredibly speedy as it utilizes slide motion for tool changes, eliminating the need for turret indexing.
4: Quick Installation
Gang tooling lathes offer fast setup times, with a simple set of tools and the ability to switch out a single block for a specific size twist drill allowing for a wide range of gang work to be accomplished.
5: Durability
Gang Tool lathes are known for their robustness, which is directly linked to their simplicity. With fewer moving parts, gang lathes are less prone to errors and malfunctions.
POLOMAC TECHNOLOGY(QING DAO)L.L.C
PROFESSIONAL CNC MACHINING MANUFACTURER & SUPPLIER
High Accuracy High Quality High Efficiency
JINN FA Machine industrial Co., Ltd. was established in 1976 as a Precision Metal Lathes Machine Tool Manufacturer. JINN FA designs and manufactures a wide range of auto lathes, cnn lathe machines, CNC machining centers and special purpose machines. Based on the company philosophy of technological innovation and leadership, JINN FA has spent great efforts in the research and development of advanced machine tools. Our precision cnc metal lathe machines have been widely sold to many countries in the world. Each metalworking lathe and machine is manufactured to the highest quality standards, with the highest versatility, providing the most competitive edge for parts machining. JINN FA machines are further enhanced by fine craftsmanship, which guarantees the user outstanding precision performance. Today JINNFA continues to labor at the technological forefront of the machine tool industry, maintaining a reputation for innovation design, state-of-the-art manufacturing techniques and rigorous quality control.
JINNFA continues to expand its service market, adhering to the company's belief of continuous technological innovation and technological leadership. In 2001, China POLOMAC TECHNOLOGY Co., Ltd. was established to enable every Jinnfa machine to serve the world.
A highly reputed manufacturer of CNC precision metal lathes, CNC machining centers and special purpose machines.
1.What is your minimum order quantity and warranty?
A:MOQ is one set, and warranty is one year.
2.What CNC system do you use?
A:FANUC, SIEMENS, MISTSUBISHI, GSK, SYNTEC. lt depends on your choice.
3:How can l choose the most suitable machines?
A: Please tell me your specifications, we can choose the best model for you, or you can choose the exact model. You can also send us the products drawing, we will choose the most suitable machines for you.
4: What's your main products of your company?
A: We are a machine tool manufacturer that produces CNC lathes, CNC milling machines, vertical machining centers, Swiss style automatic lathes, grinders, and machine tool specific tools and precision parts OEM.
5: Can you come to our company for technical support?
A : Yes, we can provide on-site technical support, but travel and service fees will need to be paid.
6. What is your trade terms?
A:FOB, CFR and CIF all acceptable.
7: What's the Payment Terms?
A:T/T, 30% initial payment when order, 70% balance payment before shipment; lrrevocable LC at sight.
){kind=link}